Rail Fastenings Systems

Safelok I

Safelok I is a heavy-haul fastening system that provides positive and lasting rail alignment on concrete ties under the most severe operating conditions.

Safelok I product overview

The result is reduced track maintenance and extended track life.

  • The wide, double-leg design of the cast-in-shoulder reduces stresses within the concrete tie, while at the same time providing high pull-out resistance
Contact

Benefits of the Safelok I

01

Maintains load-bearing capacity

Maintains its load-bearing capacity even after years of operation, thanks to the use of alloy spring steel.

02

Gauge-holding qualities

Gauge-holding qualities are excellent under the harshest conditions.

03

Quick installation

Installation is quick and easy using either hand tools or automated equipment.

04

Low maintenance

Maintenance removal and refitting is easily done with hand tools.

Technical features of the Safelok I

01

Electrical resistance

Electrical resistance up to 5 kΩ.

02

Efficient

Safelok I consists of a clip, shoulder, pad and insulator.

03

Compatible

We can provide a rail pad to suit your attenuation requirements.

04

Versatile

A long-reach variation is available for installations that require a fastening that extends half an inch further on the rail base and generates a slightly higher toe load.

Tell us about your project

Speak to an expert

Related products

Safe Driven (SD)

Designed to be delivered preassembled on the sleeper or slab element, SD can deliver higher rates of construction thanks to its efficient controlled clip guidance from parked to the in-service position.

Safe Driven (SD)

View product
Vanguard Common Interface

As its name suggests, the assembly fits on a common interface and is fully interchangeable with a range of fastenings, including FCA and DFC.

Vanguard Common Interface

View product
DFC Common Interface

As its name suggests, the fastening assembly fits on a common interface and is fully interchangeable with a range of fastenings, including FCA and Vanguard.

DFC Common Interface

View product
FCA Common Interface

The product can be pre-assembled and delivered to site captive on the pre-cast element, providing substantial cost savings.

FCA Common Interface

View product
Victor Baseplate

The modern heavy haul railway is a demanding environment, with high locomotive horsepower, dynamic braking, large rail sections and high mega gross tonnes per year.

Victor Baseplate

View product
Fastclip FE RR

Pandrol’s Fastclip FE RR rail fastening system is designed specifically for extreme heavy haul applications. It is suitable for an axle load of up to 40 tonnes and curve radius down to 150 metres.

Fastclip FE RR

View product
DRS Baseplate

The DRS baseplate is a double-resilience e-clip fastening system that is ideal for use on non-ballasted tracks when ground-borne noise and vibration reduction are required.

DRS Baseplate

View product
SICUT Composite Ties

SICUT composite ties and bearers deliver superior performance, enhanced value, and significant environmental benefits compared to wood, concrete, and steel alternatives.

SICUT Composite Ties

View product
Fastclip

Pandrol Fastclip is an established, highly-regarded resilient, threadless rail fastening. Over the years, the Fastclip family has grown to include the FC, FD, FE Fastclip products, each of which has been designed to meet the technical and commercial demands of a specific area.

Fastclip

View product
Vortok Coil

The Vortok Coil is the internationally recognised and preferred method for repairing loose screwspikes in wooden railway sleepers or dowels.

Vortok Coil

View product
SKL

SKL

View product
e-Clip SRS

This non-bonded, low-profile system is fully insulated and provides excellent stray current protection.

e-Clip SRS

View product