As a result, the clip has more elasticity, increased fatigue resistance, longer life and an increased ability to absorb deformations during installation and throughout its life.
A widely proven system across different track categories
Anti-vandal due to it needing a special tool to remove it
Low stress fastening with high fatigue resistance
Optimised for use on concrete and steel sleepers
Suitable for RN fastening retrofit
As its name suggests, the assembly fits on a common interface and is fully interchangeable with a range of fastenings, including FCA and DFC.
As its name suggests, the fastening assembly fits on a common interface and is fully interchangeable with a range of fastenings, including FCA and Vanguard.
The product can be pre-assembled and delivered to site captive on the pre-cast element, providing substantial cost savings.
The SD-HH fastening system is quick and efficient to instal with few tools and minimal training.
The modern heavy haul railway is a demanding environment, with high locomotive horsepower, dynamic braking, large rail sections and high mega gross tonnes per year.
Pandrol’s Fastclip FE RR rail fastening system is designed specifically for extreme heavy haul applications. It is suitable for an axle load of up to 40 tonnes and curve radius down to 150 metres.
The DRS baseplate is a double-resilience e-clip fastening system that is ideal for use on non-ballasted tracks when ground-borne noise and vibration reduction are required.
Pandrol Fastclip is an established, highly-regarded resilient, threadless rail fastening. Over the years, the Fastclip family has grown to include the FC, FD, FE Fastclip products, each of which has been designed to meet the technical and commercial demands of a specific area.
The rail seat assembly is typically made up of two tension clamps (SKL clips) on top of angled guide plates on each side of the rail.
This non-bonded, low-profile system is fully insulated and provides excellent stray current protection.
NABLA Evolution is a direct rail fastening system that offers enhanced performance for tracks with tight radius curves. It has been proven in installations for several decades and is recognised for its simple installation and maintenance. By maintaining the track gauge, it significantly increases the life expectancy of assembly components.