Rail Fastenings Systems

Bonded Baseplates

Limit corrugation and vibration problems caused by the major dynamic forces generated by passing trains with Pandrol Bonded Baseplates.

Pandrol Bonded Baseplates explained

The Bonded Baseplates provide both vertical and lateral stiffness via two independent cast baseplates. A one-piece bonded system (comprised of a top and bottom plate) is factory-assembled by bonding with vulcanised rubber. This provides high levels of electrical resistance, a long electrical leakage path, and lateral resilience.

This versatile system can be used on both standard track and switches. A single fastening system can be used for the whole track system as the standard model is designed for running track and customised models are designed for switching zones.

  • Suitable for top-down and bottom-up construction
  • Provides exceptional vibration mitigation
  • Delivers both vertical and lateral stiffness via two independent cast baseplates
Contact

Downloads

Product information sheet
Compliance

Advantages of Bonded Baseplates

01

High corrosion resistance

Protect the baseplate from atmospheric corrosion and wear thanks to the Bonded Baseplates rubber coating, which acts as the perfect protective barrier, extending the lifespan of the product.

02

Vibration isolation

Keep vibrations and noise generated by wheels on the track low, with the Bonded Baseplates low stiffness. This decreases the dynamic load level by distributing vibrations along the supports, rather than into the ground.

03

Electrical safety

Achieve a high level of stray current protection thanks to the DFF assembly’s failsafe designed, optimised to remain active and safe in situations where bond failure between rubber and metal components occurs.

04

Simply installation

Install the Bonded Baseplates simply and quickly. The system, or any of its components can be installed or replaced by a single person using hand tools for efficiency. Despite this ease of installation, the system provides good track elasticity and reduced rail stress.

Technical features of Bonded Baseplates

01

Variable baseplate options

Choose from the Boned Baseplates two and four-hole offset and two-hole line footprint configurations to suit your application. This adaptability provides the best solutions for new build, track renewal and retrofit projects.

02

Variable rail fastening

Wave goodbye to worries about rail specifications – the Bonded Baseplate is available with a variety of clip types, including eClip, SD, SLK, NABLA, and FE rail fastenings to suit every specification requirement.

03

Electrical insulation

Achieve high levels of electrical resistance and long electrical leakage paths with the Bonded Baseplates unique bonding process. Tests against EN Standards have shown electrical insulation performance several times higher than the minimum required.

04

Turnout options

Choose from a variety of lengths, with different base plate lengths and options to suit all turnout applications. The Pandrol Bonded Baseplate is also suitable for steel bridges and ballasted tracks.

05

Track-structure interaction

Select low-toe load rail fastening clips and zero longitudinal restraint (ZLR) configurations to make the Bonded Baseplate ideal for use on bridges and viaducts. This ensures the effects of track-structure interaction are considered and mitigated appropriately.

Tell us about your project

Speak to an expert

Related products

Safe Driven (SD)

Designed to be delivered preassembled on the sleeper or slab element, SD can deliver higher rates of construction thanks to its efficient controlled clip guidance from parked to the in-service position.

Safe Driven (SD)

View product
Vanguard Common Interface

As its name suggests, the assembly fits on a common interface and is fully interchangeable with a range of fastenings, including FCA and DFC.

Vanguard Common Interface

View product
DFC Common Interface

As its name suggests, the fastening assembly fits on a common interface and is fully interchangeable with a range of fastenings, including FCA and Vanguard.

DFC Common Interface

View product
FCA Common Interface

The product can be pre-assembled and delivered to site captive on the pre-cast element, providing substantial cost savings.

FCA Common Interface

View product
Victor Baseplate

The modern heavy haul railway is a demanding environment, with high locomotive horsepower, dynamic braking, large rail sections and high mega gross tonnes per year.

Victor Baseplate

View product
Fastclip FE RR

Pandrol’s Fastclip FE RR rail fastening system is designed specifically for extreme heavy haul applications. It is suitable for an axle load of up to 40 tonnes and curve radius down to 150 metres.

Fastclip FE RR

View product
DRS Baseplate

The DRS baseplate is a double-resilience e-clip fastening system that is ideal for use on non-ballasted tracks when ground-borne noise and vibration reduction are required.

DRS Baseplate

View product
SICUT Composite Ties

SICUT composite ties and bearers deliver superior performance, enhanced value, and significant environmental benefits compared to wood, concrete, and steel alternatives.

SICUT Composite Ties

View product
Fastclip

Pandrol Fastclip is an established, highly-regarded resilient, threadless rail fastening. Over the years, the Fastclip family has grown to include the FC, FD, FE Fastclip products, each of which has been designed to meet the technical and commercial demands of a specific area.

Fastclip

View product
SKL

SKL

View product
e-Clip SRS

This non-bonded, low-profile system is fully insulated and provides excellent stray current protection.

e-Clip SRS

View product
NABLA Evolution

NABLA Evolution is a direct rail fastening system that offers enhanced performance for tracks with tight radius curves. It has been proven in installations for several decades and is recognised for its simple installation and maintenance. By maintaining the track gauge, it significantly increases the life expectancy of assembly components.

NABLA Evolution

View product