Rail Fastenings Systems

TR System

The TR System is designed to provide an effective Theft Resistant solution for new or existing sleepers and baseplates.

TR System product overview

The TR feature is engineered between the e-Clip toe and insulator, with or without an additional cast spacer.

  • The system can be installed on sleepers originally designed for PR- and e-Clips, and does not require a purpose-designed shoulder

Benefits of the TR System

01

Highly regarded

Gives all the benefits and assurance of the well known and highly regarded e-Clip

02

Prevents fastening theft

Provides an effective means of deterring fastening theft

03

Cost-effective

A cost-effective approach to reducing theft in high-risk sections of track

Technical features of the TR System

01

Versatile

Can be installed on new or existing sleepers made for PR- and e-Clips

02

Simple

The TR System does not require any special feature on the cast shoulder

03

Theft Resistant Features

The Theft Resistant feature is based on interaction between the toe of the e-clip and the insulator (with/without a cast spacer)

Tell us about your project

Speak to an expert
Vanguard Common Interface

As its name suggests, the assembly fits on a common interface and is fully interchangeable with a range of fastenings, including FCA and DFC.

Vanguard Common Interface

View product
DFC Common Interface

As its name suggests, the fastening assembly fits on a common interface and is fully interchangeable with a range of fastenings, including FCA and Vanguard.

DFC Common Interface

View product
FCA Common Interface

The product can be pre-assembled and delivered to site captive on the pre-cast element, providing substantial cost savings.

FCA Common Interface

View product
SD-HH

The SD-HH fastening system is quick and efficient to instal with few tools and minimal training.

SD-HH

View product
Victor Baseplate

The modern heavy haul railway is a demanding environment, with high locomotive horsepower, dynamic braking, large rail sections and high mega gross tonnes per year.

Victor Baseplate

View product
Fastclip FE RR

Pandrol’s Fastclip FE RR rail fastening system is designed specifically for extreme heavy haul applications. It is suitable for an axle load of up to 40 tonnes and curve radius down to 150 metres.

Fastclip FE RR

View product
DRS Baseplate

The DRS baseplate is a double-resilience e-clip fastening system that is ideal for use on non-ballasted tracks when ground-borne noise and vibration reduction are required.

DRS Baseplate

View product
Fastclip

Pandrol Fastclip is an established, highly-regarded resilient, threadless rail fastening. Over the years, the Fastclip family has grown to include the FC, FD, FE Fastclip products, each of which has been designed to meet the technical and commercial demands of a specific area.

Fastclip

View product
Vortok Coil

Vortok Coil

View product
SKL

The rail seat assembly is typically made up of two tension clamps (SKL clips) on top of angled guide plates on each side of the rail.

SKL

View product
e-Clip SRS

This non-bonded, low-profile system is fully insulated and provides excellent stray current protection.

e-Clip SRS

View product
NABLA Evolution

NABLA Evolution is a direct rail fastening system that offers enhanced performance for tracks with tight radius curves. It has been proven in installations for several decades and is recognised for its simple installation and maintenance. By maintaining the track gauge, it significantly increases the life expectancy of assembly components.

NABLA Evolution

View product